How to Clean a Dartboard? Simple Methods

Last Updated on March 11, 2022 by Sarah

If you take care of your dartboards correctly, you can expect them to last a long time. The way you clean your dartboard depends on how much you play on it and how long it has been since you played. 

As different types of materials are used in dartboards, they have very different kinds of cleaning needs. 

So How to clean a dartboard?

To remove dirt and rust from your board, first, remove the numbering ring and clean it with WD40 and a wire brush. Once the WD40 has dried, vacuum up any remaining dirt. Lastly, clean the board’s surface with a soft and very damp cloth, and dry it with another dry cloth.

Why Do Dartboards Need to Be Cleaned

If Without proper care, a dartboard can bulge, have worn-out numbers, and become unplayable. Cleaning your board and maintaining its proper condition doesn’t take too much time. 

How to Clean a Dartboard?

Dartboards can be manufactured from three different materials and the methods to clean them will also vary, depending on the end product.

How to Clean an Electronic Dartboard?

One of the easiest dartboards to clean is an electronic one. They are durable and easy to clean since they are made from plastic. It takes only a few seconds to clean an electronic dartboard. You simply wipe it down with a dry cloth to get rid of dust and dirt. 

In the case of extremely severe dirt buildup, you might need to forcefully remove the dirt using a cotton wool swab. Also, you can also lightly vacuum these boards to remove dirt from hard-to-reach areas. Avoid cleaning them with water as they contain electronic wiring. Water can damage the electronic wiring on these boards, making them unplayable. 

How to Clean a Bristle Dartboard/ Cork Dartboard?

Being the most common board, the bristle board is the most difficult to properly clean. The most common misconception is that these boards can be soaked in hot soapy water or wiped down with the water. These actions can destroy the board.

How to Clean a Bristle Dartboard?

A bristle dartboard should never be cleaned with water, below we will share how to clean a bristle dartboard.

Step 1 – Remove the outer ring:

The first thing you need to do is remove the metal outer ring from your board. You may also need to remove the ring from the segments of your board depending on your board’s brand/model. 

In addition to holding dirt and starting to rust, the ring is an external component of the board, and removing it will allow you to not only clean the ring but also remove all dirt left on the board.

If the ring is prone to rust, give it a good clean-up with WD40 and a wire brush. These rings get a lot of dirt and corrosion build up over time.

Step 2 – Wipe the board down with a dry cloth:

Next, use a dry cloth to wipe off the board to break up any dirt and remove any loose particles. Using a wire brush would be a good idea to clean any dirt off of your wires. Do not use any WD40 or liquid during this step. 

Step 3 – Vacuum the board to remove dirt:

Cleaning your board with a vacuum is the safest and most effective way to avoid damage to the dartboard. 

Step 4 – Wipe the board with a soft cloth:

As the very last step, you will wipe the board over with a wet soft cloth to remove any stains or pieces of dirt that the vacuum did not manage to capture. 

How to Clean a Wooden Dartboard?

A Board is made of wood, such as the Manchester Log End board, requires a different type of cleaning and maintenance. Because when they are not in use, wooden dartboards need to soak to prevent from drying out and cracking. 

When cleaning a wooden board, remove it from the water and let it dry for 30-60 minutes. Once the dirt is removed, lightly brush away any debris with a soft cloth.

You can keep the board clean and looking new by using a toothbrush with soft bristles. 

Final Thoughts

How to clean a dartboard helps extend the dartboard life span. Alongside cleaning and rotating the dartboard, also keep your dart tips sharp. A damp cloth and toothbrush are enough to clean the board.

When cleaning a bristle dartboard make sure you don’t get the board wet otherwise, you will have to deal with other many issues. We hope the article helps you learn how to clean a dartboard. If you have any questions, please feel to write in the comment section. 

How to Clean a Dartboard? FAQ’s

  1. How Often Should You Clean a Dartboard?

    The frequency of cleaning a dartboard varies from board and player to player.

  2. Should you Soak a Dartboard?

    For cleaning, you should not soak a dartboard, unless you have a wooden board that needs to be soaked to prevent it from drying out. 

  3. How Often Should you Clean your Dartboard?

     If you frequently use your board, it’s a good idea to wipe away any dust that may have built up from pulling darts out of the board. A bristle board or corkboard should probably be cleaned every few months. 

 

Leave a Comment